Product Information

Co2 Flooding System

Co2 Flooding System

Carbon dioxide (CO2) gas has been used as an extinguishing agent in fixed installations since the beginning of the twentieth century.
Detailed Description

Carbon dioxide (CO2) gas has been used as an extinguishing agent in fixed installations since the beginning of the twentieth century. NFPA-12 ( National Fire Protection Association ) Rules and BIS 6382 codes for design of such system are used as standards for CO2 extinguishing systems. These fire extinguishing installations are usually provided on premises where water and foam cannot be used. CO2 can be stored in high-pressure seamless steel cylinders in liquid form with a maximum filling ratio of 0.667 kg/liter of cylinder volume.

At atmospheric pressure and 21 Degree Cel. Temperature, 1kg of liquid CO2 vaporizes to occupy 560 liters. This means that in order to “ flood/inject” CO2 gas into an environment, causing volumetric reduction of oxygen gas concentration, a large quantity of CO2 gas can be effectively stored in liquid form in relatively small cylinder volume.

HOW THE CO2 HIGH-PRESSURE SYSTEM WORKS

  • The high-pressure system operates on efficient pneumatic principles.
  • Pneumatic pressure is used to open the valves and operate pressure switches, etc.
  • No wires, pulley, equalizers or falling weights are used in this system.
  • Operating parts are located internally, eliminating the need for bulky protective cages.
  • The typical system offers three independent means of actuation :
    • Automatic
    • Remote Manual
    • Direct Manual.
close

Send Your Message

Email Id
Error message
Subject
Message
Enter between 5 to 3,000 characters, English only.

Enter Image Text *
Your message has been sent successfully.
Your message has been sent successfully. Thanks for register as non member.
Contact Person
( Director )
Location : Pune
Call : +91 9822402110